Welcome to Dongguan Wimin automation equipment Co., Ltd!
It is normal for PCB splitter equipment to have problems during operation. For factories, it is very important to extend the service life of the equipment. The maintenance of equipment is only to improve its service life, but also to ensure the quality of its work. With the development of the market. Now the assembly of SMT PCBA has basically realized an automated PCB splitter instead of manual splitting.
PCB splitter is generally mainly used in PCBA processing plants. Its purpose is to replace traditional manual folding, improve production efficiency ensure product quality. At first glance, people think that the operation of the PCB splitter is very complicated. However, in actual applications, no matter what kind of PCB splitter, the application principle is as complicated as we think.
Dongguan Weimin Automation Equipment--Dongguan Sub-Boarding Machine manufacturer introduces to everyone: The precautions for the use of PCB Sub-boarding Machine are as follows:
1. Of course, when designing the structure of the PCB splitter, in addition to the safety considerations of the distributor the manufacturer, in the actual operation, the staff should carefully check the upper lower cutters before turning on the power of the PCB splitter The spacing between. During the use of the dispenser, it is strictly forbidden to put your hands in the machine. When the machine is running, the protective plate around the blade should be removed to avoid accidents. In addition, the PCB splitter is only used for splitting cannot be used for other purposes. During the entire use process, electrostatic protection must be done well, the staff must wear an anti-static wristband before working.
2. When using the splitter, the staff must place the PCB splitting slot on the fixed knife holder, place the PCB splitter in a horizontal position to move. Do wear too loose clothes when operating the machine. Hair must be tied up to avoid accidents.
3. When using the PCB splitter, the staff must place the circuit board splitter slot on the fixed tool holder move the circuit board splitter to a horizontal position. Do wear loose clothes when operating the machine. Long hair must be tied up to avoid accidents.
4. When the PCB splitter stops working, the staff should pay attention to the maintenance work, always pay attention to protecting the upper lower knife positioning plates the upper lower blades, clean the surface internal debris of the machine, check the fastening of the machine screws at any time. If the machine is working for a long time, the upper lower positioning plates should be removed. The upper lower knives should be coated with oil to protect them, they can be wiped off before use. In addition, before using the PCB splitter, you need to check whether the circuit is damaged.
5. In addition, the daily inspection maintenance of the PCB splitter must be carried out in normal times. Check whether the blade is loose before operation to avoid accidents during operation. If the PCB splitter is abnormal needs to be overhauled, first make sure that the power cord is separated the socket before performing operations to avoid the risk of electric shock.
The above explained are the advantages precautions for use of the PCB splitter. I hope it will be helpful to you after reading it. If you want to know more about the PCB splitter, please click on our website to browse!
Mail: sales@wimintech.com
Address: Building 1, No.153 Wenzhou Road, Dongcheng Street, Dongguan City, Guangdong Province
Mobile station